Table of Contents
Advertisement
Instructions for Use
5.1.1 Admitting a patient
1. Open the Current Health app and login
2. Tap the Admit button
3. Enter the patient's identifier. Depending on your local operating institution's
configuration, you may also be permitted to use the mobile device's camera to scan
a machine-readable representation (usually a barcode or QR code) of the patient's
identifier.
4. If a patient record is found that matches the identifier entered, these fields will be
automatically populated and are displayed in order to confirm that the correct
details have been found
5. If a patient record does not exist, complete the patient information form
6. Tap Next to confirm patient details
5.1.2 Entering demographic information for a patient (depends on configuration)
1. Choose the birth sex for the patient
2. Choose the patient's ethnicity from the dropdown
3. Enter the patient's height and weight
4. Tap Next to confirm the patient's demographic information
5.1.3 Update alarms for a patient
1. Select the relevant alarming profiles for the patient.
a. Tap the checkbox next to the search field to select all profiles.
2. When an alarm is toggled on, a "Review" button will appear. This allows for an
institution-wide alarm to be tailored to a particular patient
3. To tailor an alarm to a patient:
a. Tap Review next to the alarm
b. Use the plus and minus buttons to increase or decrease the relevant alarm
threshold values
c. If edited in error, tap "Reset to default values" to clear any changes to alarm
thresholds
d. When edited, the title will read "(modified)"
e. Tap the Back arrow to confirm the tailored values
4. Verify the correct alarms are selected
www.currenthealth.com
200002/1
Page 31 of 61
Advertisement
Table of Contents
