Fitting The Device Into The Strap; Starting The Wearable Device - Current G2 Instructions For Use Manual

Wearable health monitoring system
Table of Contents

Advertisement

Instructions for Use

2.2 Fitting the device into the strap

An appropriate sized strap should be selected. The strap size can be determined visually by
a tag on the strap. Straps are in three sizes:
 Up to 25cm – Small (S on Strap tabs)
 25cm – 35.5cm – Medium (M on Strap tabs)
 35.5cm – 56.5cm –Large (L on Strap tabs)
The strap provided with the device has a plastic ring into which the device sits. To fit the
strap to the device, place the ring over the device and ensure the flat notch in the strap
matches the flat surface on the top of the device.
When correctly positioned, the arrows on the device and on the strap align and point in the
same direction.
Press down on the ring to secure the strap to the device.

2.3 Starting the Wearable Device

When the wearable device is first received new in the box, you should apply the charger for
a few minutes (see section 4).
Thereafter, the wearable device is activated when it is applied to the skin.
www.currenthealth.com
200002/1
Page 21 of 61

Advertisement

Table of Contents
loading

Table of Contents