4.
Disconnect the keyboard cable from the main board carefully, then remove the keyboard from the main
board.
Removing the 12.1" TFT LCD Module
1.
See "Removing the Hinge Cap" on page 55
2.
See "Removing the Middle Cover" on page 55
3.
See "Removing the Keyboard" on page 56
4.
See "Removing the Cable Cover" on page 56
5.
Remove the two screws from the rear of the unit and the two from the base of the unit
6.
Remove the two screws from the LCD FPC cable, and then disconnect the LCD FPC cable from the main
board.
Chapter 3
57