Fig. 60: Fitting The Filter Silencer; Table 43: Tightening Torque (72004) - ABB A255-L35 Original Operation Manual

Operation Manual / 4 Product description / A200-L
8 Disassembly and assembly / 8.21 Fitting the filter silencer
8.21.3 Fitting the filter silencer (cast)
Fig. 60: Fitting the filter silencer
Product
A265-L
A270-L
A275-L
A280-L
Table 43: Tightening torque (72004)
1. Attach the lifting gear to the front lug and rear eyelet of the filter silencer (81000).
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.
u
© Copyright 2020 ABB. All rights reserved.
Size
M14
M16
M18
M20
HZTL4036_EN
Tightening torque [Nm]
130
200
300
420
Rev.R October 2020