Right Edge; Charging The Device - Humanware Brailliant BI 40 Getting Started Manual

at any time, as well as to exit the braille terminal
when in Terminal mode.
4.3. Left Edge
On the left edge of the device, in order from front
edge to back, are the following:
1. The USB-A port—used to connect a USB
drive or other external USB storage device to
the Brailliant.
2. The Power button—press and hold this
button for 2 seconds to turn the device ON.
3. A small LED display—shows the status of
your device.
4. The USB-C connector—used to connect the
Brailliant to a host device or the AC adapter.

4.4. Right Edge

On the right edge, from front to back, are the
Lanyard slot, the Speaker, Volume Down and
Volume Up buttons, and the Audio jack (for future
use).

5. Charging the Device

NOTE: Make
completely prior to use.
Connect the USB-C end of the USB cable to the USB-
C port located on the left edge of your Brailliant.
Very little effort is required and forcing the
connection can damage the cable or the device.
sure to
7
charge your Brailliant