Connecting To A Pc Or Notebook - Humanware Brailliant BI 40 Getting Started Manual

11.2. Connecting to a PC or Notebook

Brailliant can be used as a Braille display with
popular PC screen readers such as JAWS, NVDA,
SuperNova etc. The PC or Notebook must provide
either USB or a wireless Bluetooth interface (built-
in or by using a USB Bluetooth dongle).
JAWS
JAWS 2020 includes the necessary drivers to detect
the Brailliant. If however, you are using JAWS 2018
or 2019 an installation driver is required. This can
be obtained by visiting the support section at
www.humanware.com
Other Screen Readers
Brailliant is compatible with other screen readers.
Please consult our website's support page for
additional information:
http://www.humanware.com
To connect in Terminal mode, make sure you have
a Windows®, iOS®, or Mac® device with a screen
reader running.
To connect via USB:
1. Press Space + Dots 1-2-3-4-5-6 or the Home
button to enter the Main menu.
2. Go to Terminal by pressing 't' or by using the
Previous and Next thumb keys.
3. Press Enter or a cursor routing key.
4. Connect the Brailliant to a Windows or Mac
computer with the USB-C cable.
11