5. Remove module from lower cover.
6. Remove tape (F) securing RJ45 cable (C) to module connector (G). (Figure 3-46)
Figure 3-46. Removing RJ45 Cable (1 of 2)
7. Disconnect cable (C) from module connector (G). (Figure 3-47)
Figure 3-47. Removing RJ45 Cable (2 of 2)
RJ45 Module Installation
1. Connect cable (C) to module connector (G). (Figure 3-47)
2. Install tape (F) securing RJ45 cable (C) to module connector (G). (Figure 3-46)
3. Install module on lower cover.
4. Install and secure screw (E) to module.
5. Connect RJ45 cable (C) (disconnected) to mainboard connector (D).
6. Install tape (B) securing RJ45 cable to mainboard connector.
7. Install upper cover.
Machine Maintenance Procedures
C
(Figure
ID
Size
E
M2.5x3.0 Ni
G
F
C
G
3-45)
Quantity
Screw Type
1
0
(Figure
3-44)
3-37