6. Remove screws (D) from module bracket (E). (Figure 3-11)
Figure 3-11. ODD Module Bracket and Screws
7. Remove bracket from module.
ODD Module Installation
1. Install bracket (E) on module. (Figure 3-11)
2. Install and secure screws (D) to module bracket (E).
3. Install bezel (C) on module.
4. Secure bezel locking latch to module tray.
5. Slide tray into module.
6. Install module (B) in lower cover bay.
7. Install and secure screw (A) to lower cover.
8. Install battery.
Machine Maintenance Procedures
(Figure
(Figure
3-9)
ID
Size
A
M2.5x6.0
D
M2.0x3.0
E
D
3-10)
(Figure
3-8)
(Figure
3-7)
Quantity
Screw Type
1
2
0
3-13