Yamaha MTN890 2021 Owner's Manual page 47

Instrument and control functions
Rebound damping force
Turn the adjusting screw in direction (a)
to increase the rebound damping for-
ce.
Turn the adjusting screw in direction (b)
to decrease the rebound damping for-
ce.
4
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the turns in di-
rection (b).
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
2 1/2 turn(s) in direction (b)
Standard:
1 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
TIP
When turning the damping force ad-
juster in direction (b), it may turn be-
yond
however such adjustments are ineffec-
tive and may damage the suspension.
WARNING
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
 Do not tamper with or attempt
to open the cylinder assembly.
(b) 1 (a)
 Do not subject the shock ab-
sorber assembly to an open
ame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
 Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
the stated speci cations,
EWA10222
4-29
 Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.