Yamaha MTN890 2021 Owner's Manual page 29

Instrument and control functions
 If the vehicle coolant temperature
is above 124 °C (255 °F) the cool-
ant temperature display will read
"Hi"
To reset information display items
1. Rotate the wheel switch to select
4
one of the two vehicle information
displays.
2. Press the wheel switch inward to
highlight the information display.
3. Rotate the wheel switch to select
the desired information display
item.
4. Press and hold the wheel switch
inward until the highlighted dis-
play item is reset.
Transmission gear display
This shows which gear the transmis-
sion is in. This model has 6 gears and a
neutral position. The neutral position is
indicated by the neutral indicator
light " " and by the transmission gear
display " ".
MODE display
This display shows the currently se-
lected "D-MODE" and "TCS-MODE"
settings. The mode that is enlarged
and displayed on the right can be ad-
justed using the MODE up/down
switches. Use the "MODE" switch to
toggle left-right between "TCS-MODE"
and "D-MODE".
See page 3-1 for information on "D-
MODE" and "TCS-MODE" settings.
TIP
 When the malfunction indicator
light " ", the auxiliary system
warning " ", or the coolant
temperature warning "
"D-MODE" and "TCS-MODE"
cannot be adjusted.
4-11
 The previously selected modes
will be displayed when the vehicle
power is turned on.
To turn off the traction control system,
select "TCS-MODE" with the "MODE"
switch, then push and hold the MODE
up switch until "OFF" is displayed. To
turn TCS back on, press the MODE
down switch ("TCS-MODE" will return
to its previous setting).
TIP
 When "TCS-MODE" has been set
to "OFF", the TCS, SCS and LIF
systems are all turned off togeth-
er.
 The "TCS-MODE OFF" and "TCS-
MODE M" settings can only be se-
lected while
stopped.
Clock
The clock uses a 12-hour time system.
See page 4-17 to set the clock.
Quick shift indicator "QS"
" are on,
When able to shift, the respective QS
or turns green.
the vehicle is