Bush Hog RMB 1865 Operator's Manual page 47

Rear mount boom mower

Hide thumbs Also See for RMB 1865:

Table of Contents

The four levers of machine controls must be operated from the tractor seat. During this

operation ensure no one is standing on or among the linkage arms or bars. Set tractor

hydraulics to position control. Never allow anyone below the frame unless it is securely

blocked up.

Check the welded in pins between the stabilizers jaws are in contact with the mounting rail. If not the machine

must be lowered to the ground and the next higher hole on the stabilizer valve selected, the machine raised

and contact checked. Repeat again in the third hole if necessary. On subsequent fitting to the same tractor the

hole selected is always used.

•

Adjust the top link to bring the frame of the

machine into the vertical position.

RMB 1865 11/10

ASSEMBLY

Assembly Section 3-7

Table of Contents