Table of Contents
Advertisement
ATTACHMENT TO TRACTOR
•
Reverse tractor squarely up to the machine.
•
Connect the tractors draft links - selecting the
rear most hole in the machines lower link
brackets that allow the machine to be mounted
without contacting the tractor.
•
Ensure that the same hole is used on both
sides.
•
If necessary fit the spacers supplied (as
required) to minimize sideways movement of
the tractor draft links within the hitch brackets.
•
Tighten tractor's stabilizers.
•
The lifting equipment may now be removed.
•
Fit the stabilizer nose into the tractor's top link
position. Use the highest position available
avoiding any load sensing properties.
•
The bolt-on nose of the stabilizer is reversible to
accommodate a variety of tractor linkage
designs. (Optional stablizer nose available).
•
Stretch out the stabilizer and rest the bottom
legs on the lower rail.
•
Do not fit stabilizer lower pins at this stage.
RMB 1865 11/10
© 2010 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-5
Advertisement
Table of Contents
