Sonoma OAK EFFECT MALVERN 6 Assembly Instructions Manual

SONOMA OAK EFFECT
MALVERN 6 DRAWER CHEST
ASSEMBLY INSTRUCTIONS
!
DO NOT
USE
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY
YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS
SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED
WITH THE FITTING KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE
THIS PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY
HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT
RECEIVES. IT MAY BE NECESSARY TO TIGHTEN UP THE FIXINGS
FROM TIME TO TIME. THIS IS COMPLETELY NORMAL FOR ANY
FLAT PACK FURNITURE. DO NOT OVERTIGHTEN FIXINGS .
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO
NOT USE POLISH, DETERGENT OR CHEMICAL CLEANERS .
THIS SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS
USE A PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT
MARKING.
IMPORTANT
SEC/SH/11/20/ZF1
Page 01