Gigabyte TRX40 DESIGNARE User Manual page 44

ƒ Advanced Memory Settings
ƒ Memory Subtimings
d Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus
Drive Strength, Data Bus Configuration
These sections provide memory timing settings. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
ƒ SPD Info
Displays information on the installed memory.
& CPU Vcore/Dynamic Vcore(DVID)/VCORE SOC/Dynamic VCORE SOC(DVID)/CPU
VDD18/PCH_CLDO/PM_1VSOC/PM_1V8/DRAM Voltage (CH A/B)/DDRVPP Voltage (CH
A/B)/DRAM Termination (CH A/B)/DRAM Voltage (CH C/D)/DDRVPP Voltage (CH C/D)/
DRAM Termination (CH C/D)
These items allow you to adjust the CPU Vcore and memory voltages.
BIOS Setup - 44 -