Gigabyte TRX40 DESIGNARE User Manual page 26

S
3) OC_PEG (PCIe Power Connector)
The power connector provide auxiliary power to the onboard PCI Express x16 slots. When two or more
graphics cards are installed, we recommend that you connect the power cable from the power supply to
the ATX4P connector to ensure system stability.
B S S S
S F
B_
S _S
4/5) CPU_FAN/SYS_FAN1/SYS_FAN2 (Fan Headers)
All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.
When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is
the ground wire). The speed control function requires the use of a fan with fan speed control design. For
optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
USB 0_ B
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
Hardware Installation
1 2 3
U
_ _
6
3
_
_
_
1
CPU_FAN
SYS_FAN1
1
SYS_FAN2
B_
- 26 -
3 Pin No. Definition
1 +12V
4
2 +12V
1
F_USB3 F
3 +12V
4 GND
5 GND
6 GND
_
_ _B
S F_
Pin No. Definition
B
1 GND
2 Voltage Speed Control
3 Sense
4 PWM Speed Control
1
F_USB3 F_USB30 3
S B_
B
_ S
S_
_
B
_ U
_
B
S _