Starting The Programme; Loading Door Lock - Beko WDIK752421F User Manual

5.15 Starting the programme

1. Press the Start/Pause button
to start the programme.
2. The flashing light of the Start/Pause
button will remain on, indicating that
the programme has started.
3. Loading door will be locked. When
the door is being locked, "Locking
Door" warning will be displayed.

5.16 Loading door lock

There is a locking system on the loading door
of the machine that prevents opening of the
loading door when the water level is unsuitable
to open the door.
"Loading door locked" light on the panel turns
on when the loading door is locked.
C
INFORMATION
• The door will be locked if the Remote
Control function is selected. To open the
door, you need to press the Remote Control
key or change the programme position to
deactivate the Remote Control function.
Opening the loading door in case of power
failure:
C
INFORMATION
• In case of a power failure, you can use the
loading door emergency handle under the
pump filter lid to manually open the loading
door.
A
WARNING!
• Before opening the loading door, make sure
that there is no water in the machine to
avoid flooding. Water may be hot and could
cause scalding.
33 / EN
• Turn off and unplug the appliance.
• Remove the loading door emergency
handle behind the filter cover with a tool.
• Open the loading door by pulling the loading
door emergency handle downwards.
• Try to pull the handle downwards again
if the loading door is not opened.
5.17 Changing the selections
after programme has started
5.17.1 Adding laundry after the
programme has started
When you press the Start/Pause button, the
"Loading door locked" light on the panel will go
off if the water level in the machine is suitable.
:
Washer-Dryer / User Manual