Beko WDIK752421F User Manual page 25

5.7 Spin speed selection
Whenever a new programme is selected, the
spin speed recommended for the selected
programme appears on the Spin Speed
indicator.
C
INFORMATION
• It is possible that the recommended spin
speed is not the highest value that can be
selected for the relevant programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed decreases
gradually.
Then, depending on the model of the product,
"Rinse Hold" and "No Spin" options appear on
the display.
C
INFORMATION
• Spin Speed Adjustment button works only
backwards. For example, if the display
shows 800 rpm but you want to select
1000 rpm, you will need to press the button
for a few times until you reach 1000 rpm
from 800 rpm.
5.7.1 If you want to spin your laundry
after the Rinse Hold function:
- Adjust the Spin Speed.
- Press the Start/Pause button. Programme will
resume. The machine will drain the water and
spin the clothes.
If you want to drain the water at the end of the
programme without spinning, you can use the
No Spin function.
C
INFORMATION
• If you press the Spin Speed adjustment
button in programmes where the spin
speed is not allowed, the spin speed setting
will not change and you will hear a warning.
25 / EN
-
-
-
-
-
-
You can also change the spin speed after the
washing cycle has started. After the washing
cycle has ended, you can press the spin speed
adjustment button to select a spin speed.
However, you need to do this before the
spinning step begins.
5.7.2 Auxiliary function
selection for drying
When you select a new washing programme,
press the Auxiliary Function Selection button
to set the drying option suitable for this
programme.
C
INFORMATION
• If you press the Drying auxiliary function
button in programmes where the drying
step is not allowed, the drying light will not
change and you will hear a warning.
C
INFORMATION
• Only for dying programmes, press the
Auxiliary Function Selection button to set
the suitable drying option.
5.8 Drying programmes
A
CAUTION!
• During the drying programme, the machine
automatically removes the lints coming from
the clothes. The machine uses water in
the drying step. For this reason, water tap
of the machine should be open also in the
drying programmes.
• When you select a new washing
programme, press the Auxiliary Function
Selection button to set the drying option
suitable for this programme.
-
-
-
-
Washer-Dryer / User Manual