Canon TM-5300 Online Manual page 151

IPv4 default gateway
IPv4 DNS dynamic setting
IPv4 DNS host name
IPv4 DNS domain name
IPv6 link-local address
IPv6 link-local prefix length
MAC address
IPsec settings
Printer name
Bonjour service name
("XX" represents alphanumeric characters.)
To change the setting, tap Settings.
◦ Enable/disable Wireless Direct
Select Enable to wirelessly connect without wireless router.
◦ Update SSID/password
Updates the identifier (SSID) and password.
◦ Wireless Direct device name
Changes the name (device name) of the printer displayed on Wi-Fi Direct compatible device.
◦ Connection request confirmation
Changes the display / non-display of the confirmation screen when Wi-Fi Direct compatible devices
are connected to the printer.
Note
• By tapping Advanced, you can set LAN in detail.
For the items that can be set, see the following.
Advanced
• Wired LAN
The following setting information on the Wired LAN connection is displayed. (Some items are not
displayed depending on printer settings.)
Items
Connection
IPv4 address
IPv4 subnet mask
XXX. XXX. XXX. XXX (12 characters)
Enable / Disable
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
XXX (up to 3 digits)
XX:XX:XX:XX:XX:XX (12 characters)
Disable
XXXXXXXXXXXXXXX (up to 15 characters)
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
Setting
Enabled (connected) / Enabled (disconnected) / Disa-
ble
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
151