NOCO Genius G15000EU User Manual & Warranty page 4

Mode Explanation
In Standby mode, the charger is not charging or providing any power to the battery. Energy Save is activated during this
mode, drawing microscopic power from the electrical outlet. When selected, an orange LED will illuminate.
Standby
No Power
For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a
12V
white LED will illuminate.
NORM
14.5V | 15A | Up to 400Ah Batteries
For charging 12-volt batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue LED will
12V
illuminate.
COLD/AGM
14.8V | 15A | Up to 400Ah Batteries
24V For charging 24-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a
white LED will illuminate.
NORM
28.8V | 7.5A | Up to 200Ah Batteries
24V
For charging 24-volt batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue
COLD/AGM
LED will illuminate.
29.6V | 7.5A | Up to 200Ah Batteries
12V
For charging 12-volt lithium-ion batteries, including lithium iron phosphate. When selected, a blue LED will illuminate.
LITHIUM
Press & Hold
14.2V | 15A | Up to 400Ah Batteries
12V
For charging 12-volt advanced AGM batteries, which requires a higher than normal charging voltage. When selected, a
blue LED will illuminate.
AGM+
Press & Hold
15.5V | 15A | Up to 400Ah Batteries
13.6V
Converts to a DC power supply for powering any 12VDC device, like a tire inflator, oil changer, or as a memory retainer
when replacing a battery. When selected, a red LED will illuminate.
SUPPLY
Press & Hold
13.6V | 5A | Max 6A