Setting The Clock - Paloma PG-511FR Operating And Installation Instructions

SETTING THE CLOCK

1
2
3
4
5
Important Information:
If the heather is unplugged or if there is a power failure please reset the clock.
Press ON / OFF button.
•
ON / OFF Light glows
•
The Set temp and Room temp are displayed on
the screen.
Press SET TIMES button
•
Time is displayed.
Adjust the time
•
To adjust the time of day press the ▼ down or ▲
up button until the correct time is reached.
[Example] To set clock for 11:12am
(1) Adjust the hour.
Keep pressing the adjustment button until
11.00am is displayed.
(2) Adjust the minute.
Press the adjustment button again until
11:12am is displayed.
Press SET TIMES five times.
•
The screen goes back to Set temperature and
Room temperature mode.
Press ON / OFF button to exit clock setting mode.
•
ON / OFF Light goes out.
•
Clock will be shown on the screen.
14