Override Function - Paloma PG-511FR Operating And Installation Instructions

OVER-RIDE FUNCTION
The OVER-RIDE function allows the user to manually over-ride the preset program to operate the heater.
Over-ride operation is switched ON:
•
The OVER-RIDE light glows
•
After combustion the ON / OFF light glows red.
•
Set temperature and Room temperature will appear on the screen.
Over-ride operation is switched OFF:
Over-ride light glows.
ON / OFF light glows green and timers are ready.
After the heater turns off the convection fan will continue to operate for up to 4 minutes. Do not unplug while
fan is operational.
Between Timer Operation
Press {OVER-RIDE} button ON ...The heater operates while the timers are on hold.
Press {OVER-RIDE} button OFF...The heater turns off and the preset program will resume.
During Timer Operation
Press {OVER-RIDE} button ON ...Stops operation.
Press {OVER-RIDE} button OFF...The heater will operate again.
[Press OVER-RIDE button]
13