Beurer BC 87 Instructions For Use Manual page 31

• If the Bluetooth ® function has been activated, the data
transfer to the "beurer HealthManager Pro" app starts
automatically after the measurement.
• The Bluetooth ® symbol flashes on the display. The device
now attempts to connect to the app for approx. 30 sec-
onds.
®
• The Bluetooth symbol stops flashing as soon as a con-
nection is established. All measurement data is trans-
ferred to the apps. Once the data transfer is successfully
complete, the device switches off automatically.
• If a connection to the smartphone cannot be established
after 30 seconds, the Bluetooth
the device switches off automatically after 1 minute.
• If you forget to turn off the device, it will switch off au-
tomatically after approx. 1 minute. In this case too, the
value is stored in the selected or most recently used user
memory.
Transfer of measurements via Bluetooth
In addition to displaying and saving your measurements lo-
cally on the device, you have the option of transferring your
measurements to your smartphone using Bluetooth
ergy technology.
For this, you will need the "beurer HealthManager Pro" app.
These apps are available for free in the Apple App Store and
from Google Play.
®
symbol goes out and
®
® low en-
31
System requirements:
- iOS ≥ 12.0 / Android™ ≥ 8.0
®
- Bluetooth ≥ 4.0
To transfer the measured values, proceed as follows:
Step 1: BC 87
Activate the Bluetooth
as described in the "Adjusting the settings"
section.
Step 2: "beurer HealthManager Pro" app
In the "beurer HealthManager Pro" app, add the
BC 87 under Settings / Devices and follow the
instructions.
Step 3: BC 87
Take a measurement.
List of compatible
devices:
®
function on your device