3Mt Overhead Projector 9800 Series
5-6. Post/Lock Assembly
5-6-1. How to Disassemble the Post Assembly
1. Remove post nut. See Figure 5-34.
2. Lift latch and remove the post.
3. Reassemble in reverse order.
!
Caution
When reassembling, be sure a washer is placed on
each side of the Post. Figure 5-35.
Figure 5-34. Post Lock Assembly
9800 Service Manual E 3M 1996
5-6-2. How to Disassemble the Post Lock
1. Remove post nut. See Figure 5-34.
2. Unscrew stop screw and slide lock and spring off
3. To remove post-mount pivot and bracket pivot,
4. Reassemble in reverse order.
Post Latch
Post Nut
Figure 5-35. Exploded View of Post Lock Assembly
9800–62I
Section 5 – Disassembly/Reassembly
Assembly
bottom of post.
unscrew post-mount screw.
Bracket
Pivot
Post-Mount
Pivot Screw
Post-Mount
Pivot
Washers
Spring
Screw
Stop
Screw
9800-72I
5-17