BT BT3110 Quick Setup And User Manual page 7

Quick set-up guide
Set up for additional handsets
(multipacks only)
1. For additional handsets and
chargers: plug the mains power
adaptor into the mains wall socket
and switch on the power.
2. Insert the batteries as explained
on page 5. If you set the time and
date on the first handset then it will
be shared with all other handsets
in your multi pack once you insert
the batteries.
3. Place the handset on the charger
to charge for 16 hours.
Tip
If you need to take the batteries out,
slide the battery cover down, then
gently take the batteries out.
If you need some help, call us on 0800 145 6789 or go to bt.com/bt3110
Using your BT3110 on a line
with broadband?
To avoid problems with your
broadband or noise on your
phone line, you might need to
plug your telephone line cord
into the wall socket via a
microfilter (not supplied).
If your main phone socket has
a single socket, you do need
to use microfilters, like this:
You'll need a microfilter for
every phone socket where
you've got equipment
plugged in – up to a
maximum of four per line –
including alarm sytems and
digital TV boxes.
You can get BT ADSL micro
filters from bt.com/shop
You don't need to use
microfilters if your main
phone socket has two
separate sockets, like these:
7