Step 3; Example Scenarios; Reset Procedure - Ghost Controls ZombieLock Quick Start Manual

Step 3​

H ow do I reset the Ghost Controls System when a ZombieLock is missing or removed? ​
Example Scenarios​ :
1. I previously had a Ghost Controls AXZL ZombieLock installed and now I have removed
it for some reason or another. How do I get my Ghost Controls system to work again
now that I have removed the AXZL ZombieLock from the installation?
2. I currently have a Ghost Controls AXZL ZombieLock on my gate but I have
disconnected the wires from the control board. I want to manually keep the
ZombieLock open using the key.
Follow the below procedure:
If your system is not off already, turn the system control board OFF using the switch on
the outside bottom of the system control box.
Hold down BOTH the "JOG OPEN" and "JOG CLOSE" for the 1st Arm.