D2. Wi-Fi Connection - GIT GBS-101 User Manual

D2. Wi-Fi connection

Press the button for 3 seconds.
1
Look for the four-digit code on the label
3
on the bottom of the device.
SSID: Borescope_XXXX
CODE: XXXX
5 Once the device is detected, press the
Connect button to connect.
Wi-Fi mode power button
Wi-Fi connection
The green( ) LED lights up.
Stand by until the boot is complete.
2
When booting is complete, the LED blinks blue
and green( ).
Run the app, enter the 4 digit code and
4
press the device search button.
If you check Auto setup after remembering your password,
the code is saved to simplify the connection process.
6 hen the Wi-Fi is connected, it moves to
the shooting screen.
It shows that you are connected to Wi-Fi at the top.
(Displays battery information and SSID of the device
together.)
Wi-Fi mode power LED
KA981121312449231
12/08/2019
11