Wall Mounting Of The Btx6015 - Bodet Rangee BTX 6000 Installation Manual

2.3 Wall mounting of the BTX6015

Install the panel to the wall with 4 screws Ø6mm (not supplied) and 4 matching wall anchors using the 4
teardrop shaped holes.
2.4 Mounting on the tripod stand
1/ Mount the L shaped panel bracket on the stand plate with the 4 supplied screws as in illustration B.
2/ Mount the display panel on the L shaped bracket withe the 4 supplied screws as in illustration A.
Nut HU M6 Zn
Flat washer Ø6 Zi
800
A
Screw H M6 X 20 ZI
Flat washer Ø6 Zi
Shot clock (count down from 12 to 0
second): red digits (20cm)
B
Flat washer Ø8 Zn
C
Stand plate
317
Screw H M8 X 20 ZI
Flat washer Ø8 Zn
Nut HU M8 Z
L shaped panel bracket
A
B
Tripod stand
17