Subaru 2002 Forester Owner's Manual page 43

n Adjusting the front seat shoulder belt anchor height
WARNING
When wearing the seatbelts, make sure the shoulder portion of
the webbing does not pass over your neck. If it does, adjust the
seatbelt anchor to a lower position. Placing the shoulder belt
over the neck may result in neck injury during sudden braking or
in a collision.
The shoulder belt anchor height should be adjusted to the position
best suited for you. To lower the anchor height, push the release but-
ton and slide the anchor down. To raise the anchor height, slide the
anchor up. Pull down on the anchor to make sure that it is locked in
place.
Always adjust the anchor height so that the shoulder belt passes over
the middle of the shoulder without touching the neck.
Seat, seatbelt and SRS airbags
HB1029BB
– CONTINUED –
1-15