Advertisement
LL-T1512W
2. TECHNICAL SPECIFICATIONS
Item
Power supply voltage
AC
DC
Working temperature range
Storing temperature range
Humidity range
Visual angle range
Vertical (CR u 5)
Horizontal (CR u 5)
Contrast ratio (CR)
(θ = 0°)
Response speed
Leading (tr)
Trailing (td)
Screen white chromaticity
(X)
(Y)
White surface luminance
(Y
L
Module model number
* Specifications and a part of the appearance are subject to change without notice.
NOMENCLATURE AND FUNCTION
Front view
1 MENU button
This button is used to open, select and close the On Screen Dis-
play (OSD) Menu.
2 SELECT button
When the OSD Menu is displayed, selects the menu option to be
adjusted.
3 e d button
When the OSD Menu is displayed:
These buttons are used to increase or decrease the value of a
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
4 POWER button (LED)
Turns the monitor on and off. The LED is lit green when in use and
orange when in power-saving state.
5 INPUT button
This button toggles the signal input connectors (Analog signal
input connector 13 DVI-D input connector)
6 COLOR MODE button
This button selects the color tone of the screen.
7 BRIGHT button
This button is used to change the brightness the backlight.
8 BRIGHT SENSOR
Senses the brightness of the surrounding environment to adjust
automatically the backlight level.
9 Security lock anchor
By connecting a security lock (purchased separately) to the secu-
rity lock anchor, the monitor is fixed so that it cannot be trans-
ported.
MIN
90
12.0
+5
-20
20
m70
m70
.
.
.
0.283
0.299
)
180
Rear view
TYP
100
12.5
.
.
.
m85
m85
350
5
20
0.313
0.329
220
LQ150X1MZ10
The security slot works in conjunction with kensington Micro Saver
Security Systems.
F Ventilation opening
The openings to give off an internally generated heat.
Note: Never block the ventilation openings as this may lead to over-
heating inside the monitor and result in malfunction.
G DC IN connector
Remove the cover to see DC-IN connector. The AC adapter is
connected here.
H Analog signal input
Remove the cover to see Analog signal input connector. (Analog
RGB signal connectorcable had been connected when shipping
out this monitor)
I AC adapter
AC adapter is mounted inside the cover.
J Analog RGB signal cable
Connecting to Analog RGB output connector on a computer.
K DVI-D input connector
Remove the cover to see Digital signal input connector (DVI-D24
pin). Connecting to a Digital RGB output connector on a computer.
Notes: • The input connector available for connecting to a computer
equipped with DVI compatible output connector (DVI-D24pin
or DVI-I 29pin) and XGA output capability. (Depending on
the type of computer to be connected, the display may not
work correctly)
• In order to connect, it is necessary to purchase a Digital sig-
nal cable (Model name: NL-C01E)
L USB ports
USB ports (Upstream: 1 port, Downstream: 2 ports)
Adjusting the tilt and the swivel of monitor
Lightly holding both sides of the monitor,
adjust it to a suitable viewing angle.
Note: When adjusting the screen tilt and
swivel, pressure from hands on the
LCD panel could cause damage.
1 – 3
MAX
Unit
110
V
13.0
V
+35
°C
+60
°C
85
%RH
.
Temperature
.
Temperature
.
.
25
ms
50
ms
.
0.343
.
0.359
.
2
cd/m
approx.30˚
approx.45˚
approx.45˚
Advertisement
