Monte Carlo Fan Company 5NKR52XXD Series Owner's Manual And Installation Manual page 5

13
Plate on motor
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
16
Connect white wire from fan to white wire
from LED light kit and then connect blue
wire from fan to black wire from LED light
kit.
Attach LED light kit onto the light pan,
aligning the keyhole slots on the LED light
kit with the preassembled screws on the
light pan. Twist clockwise till lock.
Reinstall the screw removed in step 15.
Tighten all screws securely.
© 2013 Monte Carlo Fan Company
14
Light pan
Attach light pan onto the plate on motor,
aligning the keyhole slots on the light
plate with the preassembled screws on
the plate. Twist clockwise till lock.
Reinstall the screw removed in step 13.
Tighten all screws securely.
17
Light pan
Glass
LED light kit
Attach glass to light pan by locating
dimples in light pan with grooves on the
glass and twist clockwise until tight.
15
Loosen 3 and remove 1 preassembled
screw from the light pan. Save screw for
later use.
18
Battery cover
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 /
Evereday A23 / GP 23A all 12V. Attach
cover of remote by placing over buttons
and snap the battery cover in place.
5
Light pan
Battery
11/5/2013