Replacement Bulbs; Electrical System Add-On Electrical Equipment - Pontiac 2008 G8 Owner's Manual

9-32 Vehicle Service and Care
9. Push the new bulb into the
socket and turn it clockwise
to lock it into place.
10. Push the bulb socket straight in
and turn it clockwise to lock it
into place.
11. Make sure the seals are applied
to the taillamp assembly and
screws.
12. Raise the spare tire cover.
13. Turn the trunk lining securing
pins clockwise to lock into
place.
14. Return the plastic trunk trim to
its original location.
15. Reinstall the plastic
retaining pins.

Replacement Bulbs

Exterior Lamp
Number
High-Beam
Headlamp
Low-Beam
Headlamp
Stoplamp/Taillamp P21/5W
Rear Turn
PY21W
Signal Lamp
Back-up Lamp
For replacement bulbs not listed
here, contact your dealer/retailer.
Electrical System
Add-On Electrical
Equipment
Notice: Do not add anything
electrical to your vehicle unless
you check with your
dealer/retailer first. Some
electrical equipment can damage
your vehicle and the damage
would not be covered by your
warranty. Some add-on electrical
Bulb
equipment can keep other
components from working as
H9
they should.
Add-on equipment can drain your
H11
vehicle's battery, even if your vehicle
is not operating.
Your vehicle has an airbag system.
Before attempting to add anything
P21W
electrical to your vehicle, see
Servicing Your Airbag-Equipped
Vehicle on page 1-30.