Meridian DSP730 User Manual page 27

 DSP730 In-Wall Digital Active Loudspeaker User Guide
Utility/diagnostic
Code Meaning
IR2 Infra-red receiver status
Cm Centre mode status
ID Identity
!R Reset
Notes
1. When in standby, a source selection command may be
followed by sb (eg CDsb). This allows eg a connected
Distributor to change source, but the speakers will remain in
standby.
2. Available only on Meridian DSP320, DSP320.2, DSP520,
DSP520.2, DSP640, DSP640.2, DSP730, and DSP750.
3. Free-space equalization is not available on in-wall
loudspeakers.
4. The non-volatile subwoofer gain is only used when the non-
volatile subwoofer setting is not SL. The range is -15 to +15 in
1dB steps.
Response
IR on/IR off
A text description of the status
A list of product name and
versions
Bye
5. The non-volatile room height is only used when the non-
volatile EBC setting is not SL. The range is 150 to 400cm in
1cm steps.
6. Centre mode applies only to Meridian DSP520.2,
DSP640.2, DSP730, and DSP750
7. Music/Movie mode applies only to the Meridian DSW and
DSW600.
8. HPA available only on Meridian DSP520.2, DSP640.2,
DSP730 and DSP750.