Table of Contents
Advertisement
5. Fit the loudspeaker
•
Using the grab handle, sit the loudspeaker on the lower edge
of the wall box.
•
Plug in the RJ45 cable(s) and AC supply.
•
With the aid of the grab handle, slide the loudspeaker into
position, inserting the top of the loudspeaker into the wall box
first.
•
Fix with M5 x 20mm guide-in screws (8 pieces).
•
Remove the grab handle to fit the last pair of screws. This is
no longer required.
DSP730 In-Wall Digital Active Loudspeaker User Guide
Guide-in
screws
(M5 x 20mm)
7
Advertisement
Table of Contents
