4. Remove the bulb holder by pressing the
four retaining tabs and pulling the holder
away from the assembly.
A. Taillamp Bulb
B. Back-up
Lamp Bulb
C. Turn Signal
Lamp Bulb
D. Stop/Taillamp Bulb
5. Replace the bulb by pulling the old bulb out
and gently pushing the new bulb into the bulb
holder socket.
6. Snap the bulb holder back into place, making
sure all retaining tabs are properly over the
bulb holder tabs.
7. Reinstall the taillamp assembly by inserting
the outboard locating/retaining pins until the
lamp is seated.
8. Secure with the inboard screws.
5-49