Panasonic DMR-UBC80 Operating Instructions Manual page 55

Basic Operation
Soundtrack
§
Show or change the soundtrack.
Multi Audio
Switch in the case of multiple audio.
Audio Description
Switch in the case of Audio Description.
Audio Channel
Change audio (LR/L/R) during playback.
Subtitles
§
Subtitle Settings
§
Turn the subtitle on/off, and change the
language depending on the media.
Subtitles
Subtitle Style
Subtitle Position
Subtitle Luminance
Subtitle Language
Select the subtitle language in the case of
multiple languages.
Angle
§
Change the number to select an angle.
Repeat Play
Select the item which you want to repeat.
Shuffle
Select whether to play shuffle or not.
Video
The original video recording method
(MPEG-4 AVC etc.) appears.
Primary Video
The original video recording method appears.
Secondary Video
Video
Select on/off of images.
The original video recording method
appears.
Soundtrack
Select on/off of audio and the language.
Reception
The radio wave status during the playback of
Home Networking (DLNA) is displayed. (Only
when a wireless connection is used)
With some discs, you may only be able to
§
make changes using the menus on the disc.
Picture Settings
Picture Settings
Picture Type ture Type
During BD-Video playback,
Sharpness Adjustment arpness Adjustment
these icons switch to the
Noise Reduction se Reduction
Luminance/Colour Adjustment minance/Colour Adjustment
ones for BD Video content.
Bandwidth Limitation ndwidth Limitation
Dynamic Range Conversion Adjustment namic Range Conversion Adjustment
24p / 25p Conversion p / 25p Conversion
Progressive ogressive
Reset to Default Picture Settings set to Default Picture Settings
Switch "Set 1", "Set 2" or "Standard" by using
[2, 1].
• You can register desired settings to "Set 1" and
"Set 2". Settings for BD Video playback and
settings for the playback of other types of media
are registered separately.
(The default settings for "Set 1"/ "Set 2" are the
same as the settings for "Standard".)
• You cannot change the "Standard" settings.
Picture Type
Select the picture quality mode during play.
Sharpness Adjustment
Noise Reduction
Luminance/Colour Adjustment
Adjust the contrast, brightness, tone curve
(white/black) colour saturation and hue.
Bandwidth Limitation
Adjusts the bandwidth limitations.
Dynamic Range Adjustment
Adjusts the brightness of the entire screen
when HDR (High Dynamic Range) video is
output.
Dynamic Range Conversion Adjustment
When this unit is connected to a TV that does
not support HDR (High Dynamic Range) input,
HDR video is output converting to a SDR
(Standard Dynamic Range) video signal. If you
set a smaller value, their contrast will be
reproduced more faithfully, but the entire
screen will appear darker. To increase the
brightness, set a larger value.
Set 1 Set 1
Normal Norma Norma Norma Normal a a a a a l l l l
Off Off
Auto Auto
Set 1
55
TQBS0037