Panasonic DMR-UBC80 Operating Instructions Manual page 39

Timer recording options
Select the items and change the settings.
e.g., [UBC80]
Timer Recording Time Remaining
Channel Day/Date Start
1 WED 07.01 8:00
Programme Name
Channel
You can select Category with the red button.
Day/Date
You can select "Date" or "Weekly" by pressing the
green button.
Auto Renewal Recording
(Only daily/weekly timer recording)
The unit will record the new programme over the
old one.
Press the yellow button.
"Renew : ON" is displayed.
Start/Stop
Press and hold [3, 4] to alter in 15-minute
increments.
Mode
Refer to "To change the recording mode (picture
quality)" ( 34).
Subtitles
You can choose whether or not to record subtitles
when the picture quality is changed.
(Only when item other than "DR" is selected in
"Mode")
Programme Name
1 Select "Programme Name", then press [OK].
2 Refer to "Entering text". (
To use Signal Supported Recording
You can choose whether or not to use the Signal
Supported Recording function by pressing the
blue button.
TUE 03.01.2017 8:05
HD 154:04 / UHD 77:02 DR
Signal Supported : OFF
Stop Mode Subtitles
9:00 DR XP OFF
84)
Timer recording from channel
information
You can make timer recording of the current or
next programme.
1
While watching a programme
Press [STATUS
e.g.,
NEWS
1
UHDTV
9:00 - 11:00
Now
2
Display the channel information of a
programme to record.
• Switch the programme with [2, 1].
• Switch the channel with [3, 4].
3
Press the yellow button.
4
Go to step 3 on page 38, "Manually
programming timer recording".
].
10:30
All DVB Channels
Set timer Change category
AD
TQBS0037
39