Table of Contents
Advertisement
You cannot play contents properly from DLNA
compatible equipment on the network.
• There may be some video that cannot be played
back on DLNA compatible equipment
depending on the equipment.
• Following programmes may not be played back:
- A programme with access restriction
- A programme with contents protection (
- A programme with incompatible format
- An encrypted programme (
• Playback via DLNA compatible equipment may
not be performed when this unit is in the
following conditions:
- While playing back a BD-Video
- While simultaneously performing Copy (Keep
Picture Quality) and recording
- While displaying the Basic Settings menu
- While executing functions using a network,
such as Network Service
• If the DLNA compatible equipment is not
capable of outputting HE-AAC audio format,
etc., sound may not be played back.
• When "Automatic" is set for "Audio Description"
(
30), some parts of Home Network function
cannot be used.
Set "Audio Description" to "Off".
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
• Use 802.11n (2.4 GHz or 5 GHz) Wireless
router.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
10)
connection interruptions or other problems.
• On the "Wireless Settings" screen (
)
continuous lighting of at least four "Reception"
indicators is the target for a stable connection. If
three or fewer indicators are lit or the connection
is being interrupted, change the position or
angle of your Wireless router. If there is no
improvement, connect to a wired network and
perform the "Easy Network Setting" (
again.
When using this unit's DVB-via-IP Server
function, the broadcast being watched on the
DVB-via-IP Client device or being recorded
with it is interrupted.
• If you use a network function other than the
DVB-via-IP Server function when "Network
Function Priority" for this unit is set to "Network
Service / Home Network", the broadcast you are
watching on the DVB-via-IP Client device or
recording with it will be interrupted. Change the
"Network Function Priority" setting for this unit to
"DVB-via-IP Server". (
Reset
To return all the settings to the factory preset
Perform "Shipping Condition" or "Default
Settings". (
96)
98)
TQBS0037
94), the
20, 94)
105
Advertisement
Table of Contents
