Table of Contents
Advertisement
To set the recording time
1 Select "Recording Time" or "Continuous
recording" in step 3 (
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with
[2, 1].
2 Press [OK].
To change the recording mode (picture
quality)
This unit can record programmes in DR mode and
then automatically change their recording mode
(picture quality) to another setting while in
standby mode.
1 Press [OPTION].
2 Select "Recording Mode".
3 Select the recording mode (picture quality),
then press [OK].
• Recording mode (Picture Quality) (
e.g., [UBC80]
Recording Mode ( Picture Quality )
HDD Remain
HD
UHD
High
Definition
Standard
Definition
• The recording mode (picture quality) set
here is used as the default value for the
next recording.
To change the recording mode (picture
quality) after recording in DR mode (
"Picture Quality Change")
To check to see if the recording mode (picture
quality) change is finished (
To cancel the recording mode (picture quality)
change (
59)
34
TQBS0037
33).
25)
h
m
(DR)
h
m
(DR)
DR(Original)
HG
HX
HE
HL
HM
XP
SP
LP
OK
RETURN
58,
59)
• Programmes in the original picture quality (DR mode) will
be deleted after their recording mode (picture quality) is
changed.
• It takes about the same amount of time as recording to
change the recording mode (picture quality).
• When the HDD does not have enough remaining space, the
recording mode (picture quality) change function does not
operate.
• A recording mode (picture quality) change stops when this
unit is turned on. The process will start from the beginning
again after the unit is switched to standby mode.
• Even if you change the recording mode (picture quality) of a
programme, its audio, subtitle and Audio Description
settings will remain the same as those at the start of
recording.
• When the recording mode (picture quality) of a programme
recorded in DR mode is changed, teletext recorded with the
programme will be lost.
• If you switch to a recording mode other than DR mode,
UHD programmes (4K) will be down-converted to 2K
programmes.
Operation during Recording
To check the recording programme
Press [STATUS
].
e.g., While recording two programmes simultaneously
HDD
Recording programme
REC1/OTR AUTO
displayed on the TV
5
REC2
Recording programme not displayed on the TV
To stop recording
Press [∫].
When recording one programme:
If the following screen appears
Stop Recording
1
Recording of this programme is in progress.
Stop this recording ?
Yes
Select "Yes", then press [OK].
No
OK
RETURN
Advertisement
Table of Contents
