Connecting Antennas; Using External Antennas - Pioneer HTP-074 Operating Instructions Manual

2
2

Connecting antennas

Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see

Using external antennas

below).
fig. a
4
1
Push open the tabs, then insert one wire fully into each
terminal, then release the tabs to secure the AM antenna
wires.
2
Fix the AM loop antenna to the attached stand.
To fix the stand to the antenna, bend in the direction
indicated by the arrow (fig. a) then clip the loop onto the stand
(fig. b).
3
Place the AM antenna on a flat surface and in a direction
giving the best reception.
4
Connect the FM wire antenna into the FM antenna
socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don't drape loosely or leave coiled up.
fig. b
Using external antennas
To improve FM reception
(For the U.S.A., Canada and Latin America models)
Use an F connector
an external FM antenna.
(For the other models)
2
Use a PAL connector (not supplied) to connect an external
FM antenna.
3
1
(not supplied) to connect
(no screw type)
75 Ω coaxial cable
14
Connecting your equipment
To improve AM reception
Connect a 5 m to 6 m (16 ft. to 20 ft.) length of vinyl-coated
wire to the AM antenna terminal without disconnecting the
supplied AM loop antenna.
For the best possible reception, suspend horizontally
outdoors.
Outdoor
antenna
5 m to 6 m
Indoor antenna
(16 ft. to 20 ft.)
(vinyl-coated wire)
2
4
34