Gigabyte GA-H270-HD3 User Manual page 7

Storage Interface - S upport for RAID 0, RAID 1, RAID 5, and RAID 10
* R efer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA
USB Chipset:
Š
- 8 x USB 3.1 Gen 1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
1 x M.2 Socket 3 connector
Š
1 x SATA Express connector
Š
6 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
2 x USB 3.1 Gen 1 headers
Š
2 x USB 2.0/1.1 headers
Š
1 x Trusted Platform Module (TPM) header
Š
1 x serial port header
Š
1 x parallel port header
Š
1 x Clear CMOS jumper
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors 1 x D-Sub port
Š
1 x DVI-D port
Š
1 x HDMI port
Š
4 x USB 3.1 Gen 1 ports
Š
2 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker
Š
Out, Line In, Line Out, Mic In)
I/O Controller iTE I/O Controller Chip
Š ®
Hardware Voltage detection
Š
Monitor Temperature detection
Š
Fan speed detection
Š
Overheating warning
Š
Fan fail warning
Š
Fan speed control
Š
* Whether the fan speed control function is supported will depend on the cooler you
connectors.
install.
- 7 -