Vivotek IB836BA-HT User Manual page 279

7.34 ePTZ setting
Group: eptz_c<0~(n-1)> for n channel product.
PARAMETER
osdzoom
<Not recommended to use
this>
smooth
tiltspeed
panspeed
zoomspeed
autospeed
rotatespeed
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the index of video stream which
support ePTZ. (capability.eptz > 0)
(capability.eptz > 0)
VALUE SECURITY
(get/set)
<boolean> 1/4
<boolean> 1/4
-5 ~ 5 1/4
1/7
-5 ~ 5 1/4
1/7
-5 ~ 5 1/4
1/7
1 ~ 5 1/4
1/7
1 ~ 5 1/4
DESCRIPTION
Indicates multiple of zoom in is "on-screen
display" or not.
* Reserved for compatibility, and suggest don't
use this since [httpversion] > 0302a
* We replace "eptz_c<0~(n-1)>_osdzoom" with
" videoin_c<0~(n-1)>_zoomratiodisplay".
Enable the ePTZ "move smoothly" feature
Tilt speed
* Only available when "capability_fisheye" is 1
Tilt speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Pan speed
* Only available when "capability_fisheye" is 1
Pan speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Zoom speed
* Only available when "capability_fisheye" is 1
Zoom speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Auto pan/patrol speed
* Only available when "capability_fisheye" is 1
Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Rotate speed (only for Fisheye series)
* Only available when "capability_fisheye" is 1
and "capability_fisheyelocaldewarp_c<n>" is 0
VIVOTEK
User's Manual - 279