Vivotek IB836BA-HT User Manual page 194

VIVOTEK
<Not recommended to use this>
profile_i<0~(m-1)>_saturation
<Not recommended to use this>
profile_i<0~(m-1)>_sharpness
<Not recommended to use this>
profile_i<0~(m-1)>_brightness
percent
profile_i<0~(m-1)>_contrastpe
rcent
194 - User's Manual
-5~5,100 4/4
-3~3,100 4/4
0~100 4/4
0~100 4/4
100: Use " image_c<n>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<n>_basicsetting" is 1.
* We replace "profile_i0_contrast" with
"profile_i0_contrastpercent ".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
-5: Less saturation <-> 5: More saturation
100: Use " image_c<n>_saturationpercent"
* Only available when bit 2 of
"capability_image_c<n>_basicsetting" is 1.
* We replace "profile_i0_saturation" with
"profile_i0_saturationpercent".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
-5: Less saturation <-> 5: More saturation
100: Use " image_c<n>_saturationpercent"
* Only available when bit 2 of
"capability_image_c<n>_basicsetting" is 1.
* We replace "profile_i0_saturation" with
"profile_i0_saturationpercent".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
Set brightness in the normalized range.
0: Darker <-> 100: Bright
* Only available when bit 0 of
"capability_image_c<n>_basicsetting" is 1.
Set contrast in the normalized range.
0: Less contrast <-> 100: More contrast