Canon G2010 Series Online Manual page 242

Important
• If ink flush is performed when the remaining ink level is insufficient, it may cause a failure.
Be sure to check the remaining ink level before performing ink flush.
How to Do Ink Flush
When using paper with one printable surface, make sure paper is loaded with
Check4
printable side facing up.
Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality.
Load paper with the printable side facing up.
Refer to the instruction manual supplied with the paper for detailed information on the printable side.
• When copying, see also the sections below:
Is platen glass dirty?
Check5
Clean the platen glass.
Cleaning the Platen Glass and Document Cover
Make sure original is properly loaded on platen glass.
Check6
Loading Originals
Is original loaded with side to be copied facing down on platen glass?
Check7
Did you copy a printout done by this printer?
Check8
If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.
Reprint from the computer if you can reprint from it.
242