5.5 Image/Alarm-out
Select one monitor channel video and then click Image button in section 9, the interface is shown as
Figure 5-12.
5.5.1 Image
Here you can adjust its view of image. (Current channel border becomes green).
Or you can click Reset button to restore system default setup.
5.5.2 Alarm output
Here you can enable or disable the alarm signal of the corresponding port. See Figure 5-13.
5.6 Multi Preview
Click Multi Preview button, the interface is shown as below. See Figure 5-14.
Figure 5-12
Figure 5-13
163