Panasonic K-NL408KT/G User Manual page 114

Please note DDNS type includes: CN99 DDNS, NO-IP DDNS and Dyndns DDNS. All the DDNS can be
valid at the same time, you can select as your requirement.
4.11.1.4 UPnP
The UPNP protocol is to establish a mapping relationship between the LAN and the WAN. Please input
the router IP address in the LAN in Figure 4-98. See Figure 4-102.
Enable：Check the box here to enable UPNP function.

Status: When the UPNP is offline, it shows as "Unknown". When the UPNP works it shows

"Success"
LAN IP: It is the router IP in the LAN.

WAN IP: It is the router IP in the WAN.

Port Mapping List： The port mapping list here is the one to one relationship with the router's port

mapping setting.
List：

Service name：Defined by user.

Protocol： Protocol type

Internal port：Port that has been mapped in the router.

External port：Port that has been mapped locally.

Default: UPNP default port setting is the HTTP, TCP and UDP of the NVR.

Double click one item; you can change the corresponding mapping information. See Figure 4-103.
Important:
Figure 4-101
108