Table of Contents
Advertisement
4.7.5
Manual Record/Snapshot
You need to have proper rights to implement the following operations. Please make sure the HDD
has been properly installed.
4.7.5.1 Manual Record
a)
Right
click
SETTING->STORAGE->RECORD. Manual record menu is shown as in Figure 4-65.
Tips
You can click REC button on the front panel (if possible) to go to the Manual Record interface.
b)
Check the box here to select manual record channel(s). You can see the corresponding
indicator light on the front panel is on.
Channel: It is to display device all channels.
Manual: It has the highest priority. Enable corresponding channel to record no matter what period
applied in the record setup. Now system is record general file.
Auto: System enables auto record function as you set in chapter 4.7.2 schedule interface
(General/Motion detect/Alarm)
Off: Stop current channel record/Snapshot no matter what period applied in the record setup.
All: Check the All box to select all channels.
c)
Click OK button to complete manual record setup.
4.7.5.2 Manual Snapshot
Click
button at the preview control bar, you can snapshot 1-5 picture(s). From main
mouse
and
select
Figure 4-65
manual
record
or
70
in
the
main
menu,
from
Advertisement
Table of Contents
