Split Bench Seats - Pontiac 2000 Montana Owner's Manual

Split Bench Seats

If you have the split bench seat (50/50 or 40/60),
the seatbacks can be folded down individually and the
sections can be removed individually. The sections can
also be adjusted forward or rearward individually.
The second row (40/60) split bench may be equipped
-
with a built in child restraint. See "Built
Restraint" in the Index.
Folding or Reclining the Seatbacks
The seatbacks on each section of the split bench seat
can be either folded down or reclined. The following
explains how to use either the nylon strap or the lever
to fold or recline the seatbacks.
1-8
-
In Child
To fold down the seatback,
pull this nylon strap on
the rear of the seat, while
pulling the seatback down
until it locks into place.
To raise a seatback, pull the nylon strap while raising the
seatback until it locks upright.
Use the lever to raise or lower the seatback to the
desired position.
When raising or reclining a seatback to an upright
position, push and pull on the seatback to check that
it is locked upright.
To fold down the seatback,
lift up on this lever located
on the front of the seatback.