Important Safety And Environmental Instructions; General Safety; Electrical Safety - Beko HCB93041XB User Manual

Table of Contents

Advertisement

Important safety and environmental
1
instructions
This section contains safety in-
structions that will help protect
from risk of personal injury or prop-
erty damage. Failure to follow these
instructions invalidates the granted
warranty.

1.1 General safety

Always have the installation and
repairing procedures carried out
by the Authorized Service Agent.
Manufacturing firm shall not be
held responsible for damages that
may be caused by unauthorized
persons.
This appliance is not intended for
use by persons (including chil-
dren) with reduced physical, sen-
sory or mental capabilities, or lack
of experience and knowledge.
Children should be supervised to
ensure that they do not play with
the appliance.

1.1.1 Electrical safety

Always unplug the appliance from
the mains supply during installa-
tion, maintenance, cleaning and
repair operations.
4 / 14 EN
If the power cable is faulty, it
should be replaced by a qualified
person certified by the manufac-
turer, after-sales service or similar
(preferably an electrician) or a per-
son described by the importer.
Operating voltage is 220 to 240
volts.
If the appliance has a failure, it
should not be operated unless it is
repaired by the Authorized Service
Agent. There is the risk of electric
shock!
Do not route power cable close to
hobs. Otherwise power cable may
cause fire since it melts down eas-
ily.
Never plug the hood before instal-
lation is completed.
In order to obtain the best perfor-
mance, external conductor must
not be longer than 4 m. It must not
contain more than 2 perpendicular
(90°) angles and its diameter must
be min. ø120 mm.
Disconnect the appliance from
mains before any intervention to
the internal parts of the appliance.
Use the appliance with a grounded
outlet only.
Cooker Hood / User Manual

Advertisement

Table of Contents
loading

Table of Contents