Table of Contents
Advertisement
Headlamps
To replace one of your headlamps, do the following:
1. Remove the first bolt. Then remove the remaining
plastic fasteners holding the shield. Use the end of a
-
flat
head screwdriver to pull up the center of the
fastener. Be careful not to break the fasteners that
hold the shield in place.
6-36
2. Remove the bolt that anchors the headlamp
assembly. Pull the headlamp assembly toward the
front of the vehicle to access the bulb assembly.
3. Twist the bulb retainer one
counterclockwise and pull the bulb assembly out.
yellowblue
-
eighth of a turn
Advertisement
Table of Contents
