Advertisement
To change the factory setting while in the programming
mode, do the following:
1. Press UNLOCK on the key chain transmitter.
2. Count the number of chimes you hear. The number of
c?&mes
tells you which mode your vehicle is set for.
You change the mode by pressing UNLOCK again.
3. Repeat step 2 until you hear the number of chimes
Mode 1: Remote All Doors Unlock (When you press
UNLOCK on your key chain transmitter, all doors
will unlock).
Mode 2: Remote Driver's Door and
A l l
Doors Unlock
(When you press UNLOCK on your key chain transmitter
once, the driver's door will unlock. If you press UNLOCK
again within five seconds,
a l l
doors will unlock.
Remote LocMUnlock Confirmation
Your vehicle comes with this feature set in Mode
4.
This
means that:
When you use the key chain transmitter to lock your
that matches the mode you want.
vehicle, your headlamps will flash briefly to let you
know the
command has been received. If you press
LOCK on the key chain transmitter again,
the horn will
sound briefly and the headlamps will flash briefly to let
you
know your vehicle is locked.
0
When you use the key chain transmitter to unlock
your vehicle or open your trunk,
your
headlamps will
flash briefly.
To change the factory setting while in the programming
mode do the following:
1.
2.
3.
Press the LOCK button on the key chain transmitter.
Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is set
for. You change the mode by pressing LOCK on
your key chain transmitter again.
Repeat step 2 until you hear the number of chimes
that matches the mode you want.
Mode 1: Off (Remote lock and unlock confirmation
are disabled).
Mode 2: Remote Lock Confirmation with Exterior
Lamps Only
Remote Lock Confirmation:
0
When you use the chain transmitter to lock your
vehicle, your headlamps will flash briefly to let you
know your command is received.
0
Remote Unlock confirmation: when you use the key
chain transmitter to unlock your vehicle or open your
trunk, your headlamps will flash briefly to let you
know your command is received.
2-49
Advertisement
